Milton-cat 416E User Manual download pdf (Page 12)

12

416E Backhoe Loader Speciﬁcations

Axle Ratings

Front Axle, 2WD,

Static

22 964 kg 50,582 lb

Dynamic 9186 kg 20,233 lb

Front Axle, 4WD,

Static

22 964 kg 50,582 lb

Dynamic 9186 kg 20,233 lb

Rear Axle, Static 22 964 kg 50,582 lb

Dynamic 9186 kg 20,233 lb

Axle Oscillation 10 Degrees

4WD and 2WD axles are pendulum mounted •

and permanently sealed and lubricated,

requiring no daily maintenance. Also features

double-acting steering cylinder with 52°

steering angle for increased maneuverability.

Engine Features

Three-ring pistons made of lightweight, •

silicon/aluminum alloy for strength and

maximum thermal conductivity.

Forged chrome/molybdenum-steel •

crankshaft with salt bath nitrocarburized

pins and journals.

Front and rear crankshaft oil seals are “lip” •

type Viton and PTFE designs featuring an

integral dust lip.

For durability, inlet valves are nitrided, •

martensitic chrome silicon steel, while

exhaust valves are nitrided, austenitic

chrome manganese-nickel steel.

Cylinder block is high strength, cast iron •

alloy of deep skirt, monobloc design for

increased strength and long life.

Cylinder head is high strength, cast iron •

alloy construction with extra duty wall and

deck thickness. Intake and exhaust ports are

precision cast to promote optimum gas ow.

Direct injection fuel system provides •

accurate fuel delivery and efciency.

Dry-type axial seal air cleaner with integral •

precleaner, automatic dust ejection system,

and lter condition indicator.

Direct electric, 12-volt starting and •

charging system with 880 CCA Group 31

maintenance free battery.

Standard glow plug starting aid system •

for efcient cold weather starting.

High contact ratio/gear train, peripheral •

xed isolation top cover and open deck

block design reduce bare engine noise.

Higher low end torque for better engine/•

machine performance.

Tires

Choices listed as combination

of front/rear tires:

11L-16 (12 ply) F-3/19.5L-24 (12 ply) •

R4 ATU

12.5/80-18 NHS (12 ply) 1-3 Super •

Traction/19.5L-24 (12 ply) R4 ATU

12.5/80-18 NHS (12 ply) 1-3 Super •

Traction/21L-24 (16 ply) R4 ATU

340/80R 18 XMCL/500/70R 24 XMCL•

340/80R 18 XMCL/19.5L-R24 (12 ply) •

R4 ATU

Brakes

Features:

Brakes meet the following standards: •

SAE J1473 and ISO 3450 requirements.

Self-adjusting, completely enclosed •

and sealed.

Foot operated brake pedals can be •

interlocked for roading.

Parking/secondary brakes are independent •

of the service brake system. Parking brake is

mechanically applied through an adjustable

hand lever located on the right console.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments