Milton-cat 980H User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
Cab sound levels of 76 dB(A)
provide quiet operation and reduce
fatigue through the long work day
Vibration is controlled to improve
operator comfort
Doors on both sides of the machine
provide easy entry and exit
Excellent visibility – front and rear –
is provided by distortion-free flat
glass, wet-arm wipers, roof channels
that drain water off the ROPS posts
instead of the windows and a roof
overhang that keeps glare out of the
operator’s eyes
Centrally located, easy to access
controls and switches with clear,
graphical symbols for more intuitive
operation
Cat Comfort Seat provides strong,
durable seating for operators of all
shapes and sizes
Command Control Steering reduces
operator effort significantly
Sound. The operator sound level for the
980H has been reduced by 4 dB(A) –
to 76 dB(A) – a 50 percent improvement
over the 980G Series II. The improvement
in sound level was made possible by the
addition of insulation to the doors and
front panels, as well as the rear and
floor of the cab. Cab pressurization has
been improved which also contributes
to the lower sound level. Also, an optional
low sound attachment reduces spectator
sound levels to 107 dB(A) and operator
sound pressure to 72 dB(A).
Vibration. Caterpillar understands that
midsize wheel loaders work in some of
the harshest environments. By controlling
normal machine vibrations caused by
these harsh conditions, operator efficiency
and productivity are improved. From the
ground up, the Cat 980H is designed
with many features, both standard and
optional, that reduce vibration.
The oscillating rear axle follows
the contour of the ground while
allowing the cab to stay steady.
The cab is attached to the frame with
rubber mounts designed to reduce
shock loads from the ground.
The articulation joint is equipped
with a hydraulic valve that modulates
the force of impact when the machine
reaches the end of its turning radius.
Dump stop snubbing is available
to slow the bucket as it reaches the
limits of travel.
Ride Control is an option designed
to reduce jolting and bouncing
during load and carry operations.
An accumulator acts as a shock
absorber to reduce machine pitching
and provide a smoother ride over
rough terrain.
Electronic sensors and hydraulics
precisely match implement lever
position to the speed and position
of the lift arms and bucket cylinder.
This precision provides smooth valve
actuation and cylinder travel while
virtually eliminating abruptness of
movement.
Automatic lift and lower kickouts
and bucket position can be set
by the operator from the cab.
These electronically controlled
cushioned stops eliminate the
jerking and bouncing associated
with abrupt stops.
Entry and Exit. An integrated ladder with
self-cleaning steps keeps debris build-up
to a minimum. The ladder is at a 5-degree
incline for easy entry and exit.
Platforms are wide allowing safe
movement to the front or rear of the
machine. The main cab door opens a
full 180 degrees and latches in place
to allow safe navigation to the rear
of the machine.
Visibility. The 980H provides excellent
visibility to both the front and rear of
the machine. Distortion-free flat glass
stretches to the floor of the cab for
excellent visibility to the bucket.
Wet-arm wipers on both front and back
keep the windows clean in any condition.
The cab roof has channels that direct
rain off the corners of the cab keeping
windows clear. An overhang on all
sides protects the operator from glare.
An optional windshield cleaning package
provides additional steps and handrails
to provide easy access for cleaning
the windows.
An optional rear vision camera is
available to more closely monitor
movement behind the wheel loader.
12
Comfort and convenience increase efficiency.
Operator Comfort
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comments to this Manuals

No comments